Sylvan Ozone Generator 3500mg/hr Ozone Output

You looking to find the "Sylvan Ozone Generator 3500mg/hr Ozone Output" Good news! You can purchase Sylvan Ozone Generator 3500mg/hr Ozone Output with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $299.00 $177.00   

Product Feature

• Ozone Air-3500 - Their most powerful model with 3500mg/hr
• Ozone Generation- Corona discharge method
• Maximum treatment area 160,000 cubic feet
• Size 8 1/4" x 7" x 6" Weight 5lbs
• Timer 1 hour with Hold

Product Description

Ozone Generators are the only solution for reducing mold, mildew, odors, and bacteria. Need to remove mold caused by flooding? Look no further You have found the solution: Ozone Air Brand Generators are used by the professional fire and water damage restoration specialists around the world. When choosing a brand of ozone machines, why not place your trust in the same brand as the Pro's? Reduce Black Mold, Mildew, Odors, Bacteria & Viruses Highly reactive ozone is created by our ozone generator. Ozone is a colorless gas made up of three atoms of oxygen (Ozone Air). It is one of the strongest disinfectants in the world with 3000 times the germ killing power of chlorine. When ozone comes in contact with mold and mildew, pollen, odors, or other airborne bacteria, one of those atoms combines with the pollutants rendering them inactive by oxidation, leaving behind pure clean oxygen, (O3). This high output ozone generator (up to 3500 mg/hr) can help: reduce levels of airborne bacteria reduce black mold and mildew reduce fungi reduce mold spores reduce odors and viruses. The air is then much cleaner and healthier. Occasionally a generator is referred to as an air cleaner or an ozone purifier. Regardless of the terminology, rest assured our machines are highly effective air cleaners, especially when it comes to killing airborne mold, or toxic mold as it is sometimes called. Many Applications Ozone generators have many applications both commercially and around the home such as: Disaster recovery An ozone air cleaner is very effective when used in the clean up process following fires to get rid of the smoke odors, or in flood restoration to kill mold and mildew. An ozone generator is often used by cleanup crews following a fire to help recover items ruined by smoke damage. Experts in mold remediation use ozone generators to kill mold in the air either before or after demolition and reconstruction. Those experts turn to Ozone Air machines

Sylvan Ozone Generator 3500mg/hr Ozone Output Review

After reading all the reviews, I splurged and bought one of these newer units with the "Always ON" feature for an old 1800 sq/ft house. It worked great removing the horrible stench of a dead squirrel in one of the walls that lingered for weeks even after removing the carcass. Bleach and deodorizers had very little affect especially with the high humidity.

For the first week, it worked great. I decided to use the "Always ON" feature while I stayed at a friend's place for the weekend. When I came back a day later, I noticed it was not outputting any ozone. The plate inside the unit was not lighting up usual purple so I contacted Sylvan, and they advised me to clean off the Ozone Plate. So I opened it up, and noticed a fruit fly on the plate. I wiped it off with some rubbing alcohol and it revived the dead unit, but it was flickering on and off and parts of the plate were not lighting up. After contacting Sylvan, they agreed to send me replacement ozone plate which I told them I would replace myself.

I gave this product 3 stars, because when it works, it does a great job, but I believe the issues I had with this unit is due to lack of features. It needs a filter for the intake port to keep debris and insects from entering the intake port and shorting out the ozone plate. I believe it has a 400cfm fan, which will pull in a lot of air and particles through the unit.

If I can figure out it was in fact the fly that shorted the plate out and not the quality of the parts used inside, I may end up keeping it and customize it to suit me better like adding a filter and installing a different timer.

Also, Sylvan's customer service is First Class!

**UPDATE 8/1/10***

The unit is completely dead besides the fan. I opened up the unit, opened the case for the power supply and I noticed a 22uF 400V capacitor had a nice hole in it. This is the reason why the Ozone Plate is not working and the reason why it was flickering before. The manufacturer of the capacitors are JakeC, which is a known low quality brand from China.

I will try to replace the bad capacitor and see how it goes.

**UPDATE 8/14/10**

After replacing the bad 22uF 400V capacitor and the other one (for safe measure), it was still dead. Since most of the PCB and components were covered in epoxy, the only thing I could test were the two 13005 transistors mounted on the heat sink (metal lower panel). Both transistors were shorted so I replaced them with high quality parts (part# ST13005) and now it's back up and running. I ran it for a 24 hour cycle in our shed, and it's been running fine without issues.

Also, the front grill is starting to oxidize from the ozone after (3) 24-hour cycles, and (10) 1-hour cycles). I assumed it was stainless steel but now it doesn't appear so.

**UPDATE 8/17/10**

It has been running great and has been doing a good job even after running it for 48 hours straight. I contacted Sylvan about the repair I made, and they offered to compensate me for my time, which shows that they do care about their customers, but I gladly declined.

**UPDATE 10/30/10**

My unit is still working well. I haven't had the need to use it as much, since it did a very good job initially by eliminating the odors that wouldn't go away. I use it maybe once a month to freshen the house and it still outputs huge amounts of ozone. For anyone not very familiar with Ozone Generators, especially ones that output this much ozone, they can be hazardous to your health so I would recommend only using it when there are no people/pets in the house (use with caution). When I walk into the house while the Ozone generator is running, I have a very difficult time breathing. Let the room air out for an hour or two and/or open windows after it has shut off.

I also want to add that long term use of this machine is not wise. Our 3 month old leather furniture ($2,500) is beginning to crack in some areas (non-seating areas) from the initial "bombing". I also ran this in my car for an hour and when I went to grab the steering wheel (has a rubbery/plastic cover), it felt very sticky. I realized the ozone was starting to break down (oxidize) the steering wheel cover which shows how damaging this much ozone can be things.

**UPDATE 12/21/12**

I've used this maybe a total of 10 times since my original review and it's still working well. Apparently, the repairs I made are still holding up. I recently quit smoking and used this in my car to get rid of the lingering smoke smell. Ran it for 30 minutes and now I cannot tell I ever smoked in there.

I read a couple of reviews on here and it appears that other people are having the same issues. If the manufacturer used better parts inside the power supply, I'm sure this product would have 5 star reviews across the board because this ozone generator is very effective when it works.

Most of the consumer Reviews tell that the "Sylvan Ozone Generator 3500mg/hr Ozone Output" are high quality item. You can read each testimony from consumers to find out cons and pros from Sylvan Ozone Generator 3500mg/hr Ozone Output ...